Topics

Hello,
What are the options for the 2 output transistors?
TIP35C
TIP36C

I am working on my friends and it has a
TIP36c and
TIP33c
set.

Is the 33c okay, and are there other models transistors that will work in these locations?


second question:
R36 is burned and I believe it should be 270 Ohm per the schematics I found. 
I would like to confirm if R 36 should be 270ohm.  My meter is reading it into the very high Meg readings likely due to the burn.

Hi,
I am working on an old Rhodes 54 model.  It has 1 missing and 4 dead pickups.  They are all the white wrapped ones.  Does anyone have any suggestions on (1) where is best place to buy them (vintagevibe, ebay, speakeasy, ect), (2) if non white wrapped ones will make the same tone (3) and if the replacement hammers and felts will work on this model?

I also need to find a tone slider pot.

Most of the information seems to be geared toward the 70 and 80 model units. 

Thanks for any leads or help.