Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - JanneI

Pages: [1]
1
Preamps, Modifications & Upgrades / DIY Peterson preamp (tremolo) pedal
« on: September 11, 2019, 01:06:57 AM »
Hi,

I made a DIY peterson preamp pedal. It uses vactrols (like VV preamp), otherwise it's identical with original Peterson. Here's a quick demo which compares it to VV model:

https://youtu.be/d2y6bqWHQtU

Best,
Janne

2
Amps, Effects & Recording Techniques / Boss CE-1 Chorus clone finished
« on: February 23, 2016, 12:20:23 PM »
Hi all!

I thought I'd share this little Boss CE-1 comparison video. I've been working on a clone pedal and I'm quite pleased with the results.

https://www.youtube.com/watch?v=CZSkfZO0OzY

It's based on this:

http://www.crazy-patroche.com/article-etude-du-chorus-boss-ce1-119548543.html

Cheers,
Janne

3
Parts, Service, Maintenance & Repairs / Custom suitcase?
« on: February 09, 2016, 02:50:51 AM »
Hi all!

Has anyone built a custom suitcase from a stage piano? I'm considering this for markII stage. Woodwork is no problem.

My plan is:

- suitcase legs
- ken rich -type of mod for the pedal (wurly type) http://www.ep-service.nl/pull-sustain-mechanism
- stage piano would have VV stereo vibe
- VV power amp module http://www.vintagevibe.com/collections/fender-rhodes-parts-electronics/products/fender-rhodes-power-amp-module?variant=899488607
- 4 speakers

What else would I need for it? Side panel?

Cheers,
Janne

4
Parts, Service, Maintenance & Repairs / Mark II lid restoration
« on: August 25, 2015, 02:28:03 AM »
Hi there! There's a lot of info on how to restore the Mark I lid, but have anyone got good diy results with the mark II lid? Mine is in a horrible condition. Any tips on sanding the groove-patterns in the lid? Is there a suitable "putty" for the plastic lid? Thanks!

Short video: https://drive.google.com/file/d/0B7eVQr1jQ_seTXQtUUJBTFRBR3c/view?usp=sharing

Cheers,
Janne

5
Hi,

I'm working on retolexing my 54 and I thought I'd share a tolex parts layout pic. All the parts of 54 will quite easily fit in 3 yards (275cm). The measurement tape is stopped at 275cm, so even 260cm might be enough. Just make no mistakes!  ;)

Cheers,
Janne


EDIT: actually two of those sides in that pic are upside down. It'll still fit.

Pages: [1]