News:

Follow us on Twitter for important announcements and outage notices.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Peller

#1
The Fender Rhodes Electric Piano / pricing mark II 54
August 28, 2009, 06:29:55 AM
That seems way too much to me. The last 54 I saw on eBay went for under £500 (UK pounds -- around 600 Euros). They seem to fetch less than the 73 or 88 note models (unless there's some rarity value attached to the MkII 54 that I'm not aware of).
#2
Great, thanks Rob.
#3
Hi,

I think I have finally tracked down a pair of leg braces for my Mk II Stage 73, but I don't have the knob that attaches them to the underside of the piano. I'm assuming I can use a generic knob like you'd find in a mic stand or something, but I'm wondering what the dimensions of the threaded part need to be -- can anyone help?

cheers
Sam
#4
hi all,

I just bought a bundle of five original Rhodes legs from eBay. As I only need one and the seller wouldn't split, I thought I would offer them here. All are usable though some cleaner than others, and one probably requires welding at the top. Three are back legs and one is a front leg, but missing the telescopic extension. Happy to sell individually or trade a couple for a leg brace. PM me if interested.

cheers
Sam
#5
Thanks folks. It seems more difficult to get the spare parts over here in the UK but I have some leads, and hopefully someone who can supply my missing top C tonebar and tine. Still no clue on the dimensions of the harp bolts, but the harp does seem very stable without them. I can't get it to go all the way to the vertical when I lift it up, though -- it jams at about 60 degrees. Is that a common problem?
#6
Basic Information
Piano Serial Number: K759074

Badge:
Black Ink Stamp Rhodes Badge upper right of harp

Name of "Model" on Badge:
doesn't say

Harp Production Start Date
upper right hand corner of harp, and color of stamp
1480, black

TBJ Number if visible
Upper right hand corner of harp
017249

Harp Production End Date
Lower right hand corner of harp or upper right hand corner for most mk2s
1701


Do you believe the piano is all original, possibly modified, or definitely modified/switched around?
All original


Additional Information (No disassembly required)

Tonebars:
Standard Gold Pitch AND Number Denoted Gold Tonebars (low register multiple bends, with numbers AND Pitch Names)

Pickups:
Standard Red Pickup

Hammers:
Full Plastic Hammers

Hammertips:
Standard Neoprene

Logos:
Rhodes logo (on Namerail, Back of Piano, inner gold badge or Ink Stamp)

Namerail:
Mark II Aluminum Rail with Black Center Strip

Faceplate:
Mark II Black Faceplate with White Border

Knobs
Black with silver center, white arrow indicator

Harp Cover:
Ribbed Black Plastic MkII

Harp Support Blocks (on the left and right side where the harp sits ontop of)
Aluminum

Keys
Wood Based

Keycaps
Later 2-piece keycap set (Whites-side wooden, flat top, Blacks-very glossy, more rounded edges '76~'83)

Sustain Pedal:
Black with Silver Rogers hihat Stand, Wingnut tightened

Legs:
Standard leg set with Braces [braces are missing]

Leg Brace Knob:
Missing or non-original knob

Hardshell Case lid:
Straight slope at keys side, all tolex

External Side Case Latches:(make sure they're not just missing, check screw holes)
Later Clamp Latches, 1 on each side near keys

Rear External Case Lid Hinges:
Later 6 screw double lip design, 2 on rear
#7
Hi,

Having discovered this wonderful forum I've been inspired to try to restore my Rhodes piano to its former glory. It had been in storage for a long time when I got it, and although I don't think there is anything fundamentally broken, it could certainly use some work. If anyone can help me out with the following questions I'd be eternally grateful!

* I've been trying to even up the level and timbre of the notes by adjusting the two screws on top of the tonebar. I can adjust the vertical position OK, but I'm finding that a lot of the tines and tonebars are out of alignment horizontally -- in other words, the tine doesn't point directly towards the centre of the pickup magnet, but  leans to one side or the other. I'm guessing this is down to worn grommets, is that likely? Is it important that the tines line up precisely in the horizontal plane, and will replacing the grommets make this possible?

* The four bolts that hold the harp assembly onto the blocks at either end are missing. Is this a problem? And if so, can anyone tell me the dimensions of these bolts so that I can replace them?

* The keyboard is still pretty even and the action is fairly fast, but there's a *lot* of mechanical noise when playing, and the keys feel a little 'loose' (you can waggle them from side to side, and they have a sort of 'hollow' feel to play). Does this indicate that some part of the action is worn, and if so, what part?

* Some of the hammer tips look fairly heavily grooved to me, but they appear to play OK -- at what point should they be replaced?

* The damper felts nearly all *look* fine, although a couple are coming away from the dampers and need re-glueing. Will I notice a big difference if I replace them all?

* Finally... are the replacement parts available in the UK, and if so, where from?

Many thanks,

Sam