Author Topic: Location of output jacks on a 200/200A  (Read 111 times)

Offline beginnersluke

  • Fiesta Red
  • **
  • Posts: 33
    • View Profile
Location of output jacks on a 200/200A
« on: March 20, 2019, 10:21:32 AM »
I have a quick question for which I couldn't find an answer in other threads, or (surprisingly) an image search on google.

I was curious about the position/placement of the output jacks for the line-out (aux) and headphones. On the retrolinear website, for their amp output board, there's a photo of what seems like an original output plate -- with AUX and PHONES labels.

Where is this on the piano? Is it the bottom left corner (if looking from the top)? That's where my 206A had the headphone jack (photo included for fun). It's both just tight to add a second jack (but could be done, I think), plus I'd like to make it more faithful to original Wurlitzer ideas.

Bottom line: if someone would be kind enough to snap a photo of the inside of a 200A showing the output jacks, I'd be much obliged.

Thanks,

Luke

Offline pianotuner steveo

  • MIDI Mark V
  • *****
  • Posts: 3213
  • A keyboard player in love with vintage guitars!!!
    • View Profile
Re: Location of output jacks on a 200/200A
« Reply #1 on: March 21, 2019, 07:53:03 AM »
It's pretty close to that spot, on the bottom. There is also a trim control (200A) You have to try both jacks to see which signal is better for what you are using it with. Sometimes the aux out is too hot. Of course you would use the volume control as a trim pot for the headphone out.
I have no way to post pictures on here, plus my 200A is in the attic at the moment.
« Last Edit: March 22, 2019, 06:25:53 AM by pianotuner steveo »
1960 Wurlitzer model 700 EP
1968 Gibson G101 Combo organ
1975 Rhodes Piano Bass
1979 Wurlitzer 206A EP
1980 Wurlitzer 200A EP
1980 Wurlitzer 270 Butterfly Grand
2000 Yamaha acoustic piano
2004 Hammond XK3
2009 73A Rhodes Mark 7
2009 Korg SV-1 73
....and a few guitars...

Offline cinnanon

  • Mark I
  • ****
  • Posts: 520
    • View Profile
Re: Location of output jacks on a 200/200A
« Reply #2 on: March 21, 2019, 05:02:37 PM »
See the block on the left that the amp rail mounts to?  On 200’s and 200A’s it is two smaller blocks and the output plate hangs off the amp rail into a pocket.

Offline sean

  • Mark II
  • *****
  • Posts: 781
    • View Profile
Re: Location of output jacks on a 200/200A
« Reply #3 on: March 21, 2019, 05:54:46 PM »


This is where it is on my Wurly 200:




Sean