Author Topic: 206a - no sound  (Read 175 times)

Offline DougDA

  • Pre-Piano
  • *
  • Posts: 9
    • View Profile
206a - no sound
« on: October 17, 2019, 01:19:55 PM »
is there a way to check/test the output from the preamp?   I'm now getting no sound when played...only white noise/static from the speaker.

Offline pianotuner steveo

  • MIDI Mark V
  • *****
  • Posts: 3274
  • A keyboard player in love with vintage guitars!!!
    • View Profile
Re: 206a - no sound
« Reply #1 on: October 17, 2019, 09:56:28 PM »
Was it working before? Did it quit suddenly, or were you working on it with the power on?
It could be fuses, but it could be many other things also...
Trouble spots tend to be where connectors are
« Last Edit: October 18, 2019, 02:12:23 PM by pianotuner steveo »
1960 Wurlitzer model 700 EP
1968 Gibson G101 Combo organ
1975 Rhodes Piano Bass
1979 Wurlitzer 206A EP
1980 Wurlitzer 200A EP
1980 Wurlitzer 270 Butterfly Grand
2000 Yamaha acoustic piano
2004 Hammond XK3
2009 73A Rhodes Mark 7
2009 Korg SV-1 73
....and a few guitars...

Offline DougDA

  • Pre-Piano
  • *
  • Posts: 9
    • View Profile
Re: 206a - no sound
« Reply #2 on: October 18, 2019, 12:51:40 PM »
it worked great.....  then i installed the vibrato kit....   and it still worked great (as before,  but with zero vibrato),   then it got to where it would play intermittently....and would go silent for no apparent reason, and sometimes the sound would come back after depressing the sustain pedal a few times.   this made me think something had a loose connection but i can't seem to isolate anything.

now I just get a loud woof sound.  i have the speaker connections hooked up to AMP OUT - 16  and ground.

fuses all test good.

Offline pianotuner steveo

  • MIDI Mark V
  • *****
  • Posts: 3274
  • A keyboard player in love with vintage guitars!!!
    • View Profile
Re: 206a - no sound
« Reply #3 on: October 18, 2019, 02:11:03 PM »
It could be a broken trace or cold solder joint(s) on the amp board.
Have you reflowed the solder connections?
1960 Wurlitzer model 700 EP
1968 Gibson G101 Combo organ
1975 Rhodes Piano Bass
1979 Wurlitzer 206A EP
1980 Wurlitzer 200A EP
1980 Wurlitzer 270 Butterfly Grand
2000 Yamaha acoustic piano
2004 Hammond XK3
2009 73A Rhodes Mark 7
2009 Korg SV-1 73
....and a few guitars...

Offline DougDA

  • Pre-Piano
  • *
  • Posts: 9
    • View Profile
Re: 206a - no sound
« Reply #4 on: October 21, 2019, 01:17:08 PM »
ok.... it reflowed the amp and preamp and found one loose solder joint.   

currently i don't get the loud whoof noise.   just white noise through the speaker and no sound from playing the keys


what should i try next to start isolating the issue?

Offline Tim Hodges

  • Vendor
  • Mark II
  • *****
  • Posts: 819
  • Tim
    • View Profile
    • Facebook
Re: 206a - no sound
« Reply #5 on: October 21, 2019, 03:50:38 PM »
Do you get sound from the aux or headphone jack?
Bristol Electric Piano
UK

Facebook
YouTube
Reverb.com

Offline DougDA

  • Pre-Piano
  • *
  • Posts: 9
    • View Profile
Re: 206a - no sound
« Reply #6 on: October 21, 2019, 04:57:44 PM »
those were part of the 'student' part of my 206a.   all of that got by passed and i have the speaker hooked directly to the "16" pin on the amp board (and ground)

Offline cinnanon

  • Mark I
  • ****
  • Posts: 535
    • View Profile
Re: 206a - no sound
« Reply #7 on: October 21, 2019, 10:47:27 PM »
Check if you have signal through the aux out first. That signal is tapped before the power amp section (where you’re hearing the whoofing noise). Also, does the noise get louder and softer with the volume knob?

Offline DougDA

  • Pre-Piano
  • *
  • Posts: 9
    • View Profile
Re: 206a - no sound
« Reply #8 on: Yesterday at 09:31:49 AM »
there is no aux out on my wurly (yet).   

and for whatever reason,  the loud whoof is now gone.   just faint white noise thru the speaker.    the volume control has a minimal affect on in

Offline DougDA

  • Pre-Piano
  • *
  • Posts: 9
    • View Profile
Re: 206a - no sound
« Reply #9 on: Yesterday at 10:26:33 AM »
is there a way to test the amp with an external source (iPod) since mine doesn't have the RCA ?