Author Topic: Looking for a Mk V spare part  (Read 315 times)

Offline Elleven

  • Pre-Piano
  • *
  • Posts: 2
    • View Profile
Looking for a Mk V spare part
« on: January 28, 2021, 02:36:51 AM »
Hi,

I'm just refurbishing my Mk V and have difficulties to get a replacement for the four bottom mounting sockets, where to lock the stand with the piano. Does anyone know, where to get these parts? I already checked the commonly used dealers, but they mainly provide everything for Mk I and Mk II, but not so much for the Mk V. Attached some pictures of the parts.

Thanx a lot in advance,
Armin


Offline Peter Hayes

  • Vendor
  • Mark I
  • *****
  • Posts: 206
    • View Profile
    • http://www.elecedge.com
Re: Looking for a Mk V spare part
« Reply #1 on: January 28, 2021, 04:08:01 PM »
Many years ago I needed some. I googled the part number on the part and found that they were originally made for the boating industry for tie downs (or something). I then found a marine parts supplier who had them. Wish I had better info, but it might get you heading in the right direction.
Peter Hayes
Electronic Edge
http://www.elecedge.com
937-767-7174

Offline Elleven

  • Pre-Piano
  • *
  • Posts: 2
    • View Profile
Re: Looking for a Mk V spare part
« Reply #2 on: February 11, 2021, 01:22:00 PM »
Yeah - I got it! Took me a couple of days for scanning the internet. It's used in an C42 aircraft  ::). It's from CAMLOC, pt. no. 99R10-01A1. If someone else need it, I've just ordered a batch of ten (just the lock without the washer. Just PN me. You can find it here:

https://funflight-shop.de/produkt/camloc-haltenocke

Cheers,
Armin