Author Topic: Correct impedance of Janus FR7710 amp?  (Read 312 times)

Offline auntjamie

  • Pre-Piano
  • *
  • Posts: 1
    • View Profile
Correct impedance of Janus FR7710 amp?
« on: March 01, 2021, 06:50:28 PM »
Hi all,

I've heard two opposite pieces of information about the impedance of the Janus FR7710 amp.

This post says the amp is 16 ohms per channel, so using two 32-ohms in parallel or two 8-ohms in series are the speaker wiring options.

However, this post says "The Janus/Haigler amplifiers expect to see a 4 ohm load to deliver their full power." So two 8ohms in parallel for each channel.

Any confirmation on either of these two contradicting pieces of info? I'm having difficulty finding any other sources for this.

Offline Jenzz

  • Mark I
  • ****
  • Posts: 125
    • View Profile
Re: Correct impedance of Janus FR7710 amp?
« Reply #1 on: March 05, 2021, 04:54:41 AM »
Hi .-)

Janus / Haigler (5-Pin XLR connector cabinet): 4 Ohms (2x 8 ohms parallel) per channel

Peterson (4-Pin DIN / or Chinch-Jones connector cabinet): 16 Ohms (2x 32 ohms parallel or 2x 8 ohms in series) per channel


Rhodes tech in Germany

VintageVibe 64 ACL + DOD FX25B, EHX SmallStone, Tone City Sweet Cream, Pearl FG-01

Adams Solist 3.1 Vibraphone