Follow us on Twitter for important announcements and outage notices.

Main Menu

Rhodes 73 Preamp

Started by telmore1964, June 10, 2022, 05:43:12 PM

Previous topic - Next topic


Hello, I recently picked up a Rhodes 73 (circa 1975) that has been in storage probably 25 years. I have gone through and recapped the preamp and installed new vibrato lamps. I noticed I still get sound out of  the piano on both channels when the volume control is at "0" and I was wondering this is normal and what the reasoning might be.



Here's an update to my original question I discovered the low end of the volume pot had a cold solder joint and after re-soldering that connection the audio output now goes to "0".