Follow us on Twitter for important announcements and outage notices.
Started by Jimmbo, June 27, 2022, 08:43:18 PM
Quoteit might be the push rod hitting bare wood on the sustain dowel or maybe the side of the dowel that makes contact with the damper rail is missing the felt on that part. Also: make sure the damper pins installed on each end allow the damper rail to move up and down.
Quote from: Jimmbo on June 28, 2022, 03:48:33 PMAlso, I guess this is unrelated, but the harp scrapes the left railing as it hinges up, ripping up the felt.
Quote from: Jimmbo on June 30, 2022, 09:59:30 AMAny tips for addressing the overall rust?
Quote from: Jimmbo on June 30, 2022, 09:59:30 AMGacki - good point! It's not like it evaporated! However, the pin is definitely not in the rail, nor anywhere easily accessible in the case. I'm obviously bad at this, so I'll buy a new one rather than take the whole thing apart looking for it.And I'll buy two pins. I will not tolerate atrocity!Any tips for addressing the overall rust? Here are two panoramic shots:I've learned from reading the forum that the white dust is a natural outcome from the zinc coating and not a problem.I really can't thank you (all of you!) enough!