Trouble finding a short.

Started by Phathead, July 28, 2022, 02:29:54 PM

Previous topic - Next topic

Phathead

Hello,

So, I'm restoring a 200A foe a friend. It was super noisy and eventually stopped making sound all together. Broke through a bit if you played hard. Classic signs of a short.

It was modified in the 80's by a previous owner to reduce weight for touring.

Speakers and tranny removed. Custom board with 2 small trannies installed.Vibrato removed.

I replaced the board with the VV one and installed a brand new VV tranny. Figured I might as well because my friend wanted a cleaner sound and vibrato back.

Still no sound, but sometimes if you play hard it lets faint distorted tones through.

I've checked every reed for debris, checked every ground connection. Ran a synth through the VV board to make sure it wasn't faulty. Works great. Power is good.

I'm getting 41v of the pickups.

The RCA cable I made has continuity across both wires. Is there something special about the VV one that I missed maybe?

Anyways, any suggestions would be greatly appreciated.

pianotuner steveo

Your pickup voltage should be closer to 150vdc.
You may have some reeds shorted across their pickups. Or blown fuses.
1960 Wurlitzer model 700 EP
1968 Gibson G101 Combo organ
1975 Rhodes Piano Bass
1979 Wurlitzer 206A EP
1980 Wurlitzer 270 Butterfly Grand
2009 73A Rhodes Mark 7
2009 Korg SV-1 73
2017 Yamaha P255
2020 Kawai CA99
....and a few guitars...