Author Topic: stabilizer bars  (Read 2303 times)

Offline jim

  • Mark I
  • ****
  • Posts: 743
    • View Profile
    • http://www.myspace.com/cyberjimpatterson
stabilizer bars
« on: September 21, 2004, 01:46:13 AM »
would any of you kind souls be nice enough to tell me how long the stabilizer bars from the stage rhodes are? i wanna make some, and have none to copy.

Offline BackRoomSounds

  • Mark I
  • ****
  • Posts: 161
    • View Profile
    • http://www.backroomsounds.com
stabilizer bars
« Reply #1 on: September 21, 2004, 06:04:58 AM »
If I can remember I 'll measure them up later.  8)

Offline BackRoomSounds

  • Mark I
  • ****
  • Posts: 161
    • View Profile
    • http://www.backroomsounds.com
stabilizer bars
« Reply #2 on: September 21, 2004, 04:34:13 PM »
OK they are a 3/4inch tube and they are 34inch long with 2inch squashed flat at one end and 1inch squashed at the other the flat ends are rounded off and a slot cut in. These flat ends are also bent at apposing angles, sorry didnt measure these. The 2 inch flat angle goes to he base of the Rhodes and the one inch bend to the rear leg which has a threaded slot to take it.

Hope that makes sence

 8)

Offline jim

  • Mark I
  • ****
  • Posts: 743
    • View Profile
    • http://www.myspace.com/cyberjimpatterson
fantastic helpful people
« Reply #3 on: September 22, 2004, 12:48:40 AM »
:P Thankyou so much backroomsounds!
i'd like to by you a virtual beer, cheers.

Offline BackRoomSounds

  • Mark I
  • ****
  • Posts: 161
    • View Profile
    • http://www.backroomsounds.com
stabilizer bars
« Reply #4 on: September 22, 2004, 04:49:08 AM »
No worries Jim


cheers

[/url]