no sound out of a Wurly 200A's Aux Out

[arodes]

Hi. I managed to grab a Wurlitzer 200A in london. It sounds great and the action is still good but it has seen better days. It needs 3 new reeds, a sustain pedal and legs.. On top of that the aux out is only producing hiss so far (and not a particulary pleasant one).
The phone out and speakers are OK so I guess it's not something major and I should be able to handle it by myself. Anybody had a similar issue? Any tips or schematics would be really appreciated.

[martin]

it'll probably be the fuses. theirs a fuse for the line out, and a fuse for the headphone out. i bought a fuse mod from vintage vibe last year, but it turned out i didn't need it. its a new fuse fitting because you can't get the right size fuses anymore. check the fuses. i can sell you the fuse mod for what i paid for it. it cost me £6, so you can have it for that plus p+p, aprrox £8 all together

ps. its really easy to fit

[arodes]

thanks! i'll check and get back to you

[arodes]

Sorry for the delay. I'm trying to figure out which of the amp fuses is the aux's but the schematic I have isn't really clear. Is it the left or right one?

[arodes]

I bought a multimeter and have tested the 3 fuses. They are all OK so that's definitely not the problem. Anybody has a suggestion as to what else could be wrong? I've tested the wires from the jack to the pcb and that's fine too. I'm trying to locate where it goes wrong on the pcb but due to my meagre knowledge of electronics I can't figure out if the readings I get are normal.

[pianotuner steveo]

Try going to the wurlitzer specific site and asking Keith or Kevin-the 2 main electronic techs.