News:

Shipping now! "Classic Keys" book, a celebration of vintage keyboards  More...

Main Menu

some promised sparkle top pics

Started by turtle13, June 24, 2008, 12:48:04 PM

Previous topic - Next topic

turtle13

Here are some of the pics i promised of my sparkle top, sorry about the quality, all i had was my blackberry to take pictures with. there are three printed numbers i can see. 2 on the hammer action, and one on the gold sticker on the harp. i still cant find one on the body anywhere.



you can see where some fool had previously mounted a power supply on the back side of the namerail...

serial # A-0186




tbip2001

Hi mate, Thanks for sharing the pics.

Is it playing?? Is your plan to restore the cab?? If so, will you post pics of the restoration job all the way please??

Thanks again
Jim
tbip2001

turtle13

its getting there playability wise... it has been abused and neglected for far too long, and well lets say its been a lot of work over the past six months. but considering what i paid for it, its all worth it.

i would like to restore the cab fully, but would prefer to keep the integrity of the instrument as much as possible. the only problem i am finding is that absolutely no parts are available for rhodes of this vintage. If nothing else i am going to make a frame to go on the inside and cover it with grill cloth and a sustain pedal foot plate to bring it back to at least looking correct. This rhodes will not see live use, and will just stay in our studio along side our organ and all of our other boards, so its not imperative that i restore the amplifier. but the cab does look kinda trashy right now...

Mark II

yes, that sounds solid. I wouldnt care that much about the amp, yes for collectors it would be wonderfull to restore this piano but parts are hard to get. So, I would restore the cabinet just as you suggested: the outside and leave the monitoring to something superior than a 40 years old amp.

kind regards

Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp

Rob A

Quote from: "Mark II"leave the monitoring to something superior than a 40 years old amp.

Ooooh, that's almost heresy. I happen to agree though.

Ben Bove

Looks great!

I agree trying to find an original jordan amp, plus servicing it, PLUS getting a set of speakers, is probably going to set you back some serious money.  Being that it was for "live" playing only, really, it wouldn't make sense for your application.  

Are suitcase cabinet dimensions all the same?  He could just grab a silver grill panel and install to at least close the cab.

A couple quick questions - is there a date code on the side of the bottom-most left key?  Are there any date codes on the top of the harp?  If you have time, there may be a date code on the underside of the harp, which requires you to unscrew it and swivel up.

Does it have full wooden shank hammers, or plastic shafts with wood/teardrop hammers?

Thanks, again great find!
Retro Rentals & Restorations
Vintage Music Gear

http://www.retrorentals.net
310-926-5799
info@retrorentals.net

FB: https://www.facebook.com/retrorentals.net/
IG: @RetroRentalsNet

turtle13

there is no date code on the bottom of the harp besides the serial, i have not seen any on any keys when straightening all the pins to smooth out the key action. the only production stamps i have found are the ones posted. i have not had the time or spare room to fully pull it apart to "really clean" the piano so there may still be one lurking inside there somewhere.
it does have full wooden hammer shanks, and they are all straight as well. the teardrop hammers could use a little TLC though. they are pretty grooved, but still mainly playable.

Mark II

Quote from: "Rob A"
Quote from: "Mark II"leave the monitoring to something superior than a 40 years old amp.

Ooooh, that's almost heresy. I happen to agree though.

jehovah, jehovah. :wink:

I think I like 40 years old speakers though.

Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp

turtle13

Quote from: "Mark II"
Quote from: "Rob A"
Quote from: "Mark II"leave the monitoring to something superior than a 40 years old amp.

Ooooh, that's almost heresy. I happen to agree though.

jehovah, jehovah. :wink:

I think I like 40 years old speakers though.

Mark II

I tottaly agree, sounds way better through my Vox Royal guardsman 2x12 cab than my full stack.... a little raunchier, but so much more rhodes funkiness...
New speakers just don't break up the same.

tomnardozza

hmmm i DO have an extra jordan amp.....AND 4 32 ohm speakers....did they use 32 ohm too???
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

Ben Bove

Well I'm still trying to determine the speaker set up on jordan amps.  I believe they were 8 ohm, 2 speakers facing audience.  Can u confirm 2 or 4 speakers on your cabinet?  Were they 12" or 10"?

The very first peterson setup used 32 Ohm for the stereo channels, and originally was 2x12 to audience with 2x10 to player I've been told.
Retro Rentals & Restorations
Vintage Music Gear

http://www.retrorentals.net
310-926-5799
info@retrorentals.net

FB: https://www.facebook.com/retrorentals.net/
IG: @RetroRentalsNet

turtle13

unfortuatly I am not at the same house now to check, but i am pretty sure they are 12's and this is the preamp that I have as well...

which as far as i have seen, only has a mono version, and no stereo. does any one know of a way to test this preamp with out the power amp to power it. What is the power requirement to get it powered up and over what connector. if i could use the mounting points that someone already made it would be fine as i can't change those holes now... maybe replace the outside fuse holder with a sweet green or purple power light. mainly if i can get the stock preamp working that would be fantastic.

tomnardozza

did you get that preamp from vintage vibe???
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

Rob A

Hey we've got several of us in the KC area now.

turtle13

nope, it came with the piano, I just stole the pic from vintage vibe...

tomnardozza

you kc guys ever go see TUF (trampled underfoot) blues band????
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

Mark II

according to Mark Vail (page 266) it's two 12' and two 10' speakers.

Maybe an owner of an early Jordan Suitcase can confirm that.

kind regads

Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp

tbip2001

Can someone clear up what cab configurations were available in terms os speakers.

I thought the suitcases of silvertops, and later models were all 4 x 12" ???

But the model in the pic above only has slots for 2 x12" or is it the case that 2 speakers faced forward and 2 faced the player??

Thanks
tbip2001

Ben Bove

It's very difficult to nail those specs down.  There are not enough examples of these early pianos still available to cross reference this.  Most have the cabinets trashed as the amps blew out.

First, With the jordan cabinet being mono, My assumption is that there were only 2 speakers to accomodate this, at 50W, facing audience (I believe someone on the suitcase survey confirmed this).  Perhaps there were 4 speakers, but it would seem overkill for one channel.

My guess would be that then the Stereo Peterson was introduced around 1968 with 2x10 facing player while 2x12 facing audience.

Perhaps though the stereo peterson amp only came with 4x12, but I believe Fred has a peterson silvertop that said he has 2x10, 2x12.
Retro Rentals & Restorations
Vintage Music Gear

http://www.retrorentals.net
310-926-5799
info@retrorentals.net

FB: https://www.facebook.com/retrorentals.net/
IG: @RetroRentalsNet

tomnardozza

mine has the mono jordan amp......and 2x10s and 2x12s......the pots are dated 1966
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

Ben Bove

Way to confuse things!  haha.
Retro Rentals & Restorations
Vintage Music Gear

http://www.retrorentals.net
310-926-5799
info@retrorentals.net

FB: https://www.facebook.com/retrorentals.net/
IG: @RetroRentalsNet

tomnardozza

hey....you asked for it!!!!!  hahaha
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

turtle13

Well I am glad that I can cause such confusion...
Oh well I have found out more through this forum than anywhere.
Is there anyway that some one could use a multimeter and check the voltage/amps off the jordan power amp to power up the pre? Is it the same 15v DC that the other pre's require? I really want to at least get the pre back to working condition before I tackle anything else.

Mark II

Quote from: "turtle13"Well I am glad that I can cause such confusion...
Oh well I have found out more through this forum than anywhere.
Is there anyway that some one could use a multimeter and check the voltage/amps off the jordan power amp to power up the pre? Is it the same 15v DC that the other pre's require? I really want to at least get the pre back to working condition before I tackle anything else.

watch out: dont mix voltages of the preamps:

peterson 4pin: +25 VDC
haigler 5pin: +15VDC and -15VDC
jordan:

here is the schematic
they is a 13.5 Volt (break down voltage) Z-Diode in the preamp section. this reverse biased Z-diode will conduct and shortcut B+ and ground in case the voltage exceeds 13.5 volts, so
the jordan needs 13.5 volt or a little less.


someone please confirm this, maybe it's too early for me with reading schematics. And I am not that familiar with Z diodes.
http://en.wikipedia.org/wiki/Zener_diode

kind regards

Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp

turtle13

so really to test it, all i would need would be 13.5V DC power supply, a plastic project box, a TRS plug, 1/4 in jack and some wiring. wire the ring up to 13.5 v line, share ground on piano out and power supply and wire the signal through to the 1/4 in jack. am i missing anything on building a power supply box that vintage vibe likes to charge 150 bucks for? does any one have one for the jordan pre that you can take the top off and check out?

Mark II

basically your right.
any 13,5 volt DC power supply will do, mouser and others might have a cheaper solution for you, but I am not sure. you could easily solder a different plug to it.
But, I am sure you will find out.

Builing a power supply from scratch will require some tools and skills.

btw. it might even work with a 12 VDC PSU.

kind regards

Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp

turtle13

i am fairly skilled with a soldering iron... my friends know me as the mad scientist... but humbly, i am no where as skilled as they think. however it is something that i feel is well within my grasp, even though my schematics reading ability isn't what it used to be... mainly i just dont want to fork out 150 bucks for something that with an hours work could cost you just about 30. and for a preamp that could or could not function when i get it powered up, not much less a preamp that from what i understand have alot of parts that are not produced any more. If i make a power supply for the board i will post a step by step for those in my situation.

turtle13

as well if the preamp doesn't work, i may make a new name rail as to not muck with the original, and stuff my seymour duncan pickup booster/maxon OD808/MXR phase90/ and some random echo pedal into it so i can have a monster rhodes. however i would much rather have the original pre...

tomnardozza

the preamp pic is actually my old one that didn't work.....i found another and traded chris for some other stuff i needed
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

turtle13

So the pic I stole off of vintage vibe was your old preamp.

tomnardozza

yup...i think they want some crazy price like $500 for it, right?
"What's in a name? that which we call a rhodes
     By any other name would smell as sweet......"

turtle13

Hmmm... Maybe I don't need the original pre amp. I could use a new set of tear drop hammers and about 5 new raymac tines.



Actually I am thinking of having my buddy take a look at it to make sure all parts are within spec. The only problem is that he has high rates and a hell of a bench fee since he mainly does one off custom clones of mic pre's and compressors. On that note, I want to know what this thing sounds like through a grace M101 or an Amek purepath. Mmmmmm fat.