News:

Shipping now! "Classic Keys" book, a celebration of vintage keyboards  More...

Main Menu

Fender Rhodes Mark I help

Started by duker, July 13, 2009, 06:30:27 PM

Previous topic - Next topic

duker

I recently starting refurbishing my 1971 Mark 1 Stage Piano. The keyboard is in fantastic shape and is only missing parts from the sustain pedal and the legs.

General help need with a few things though.

1) I really like the faux vinyl finish on the plastic harp cover but it has scratches and numerous scratches. I've read bondo and other filling agents work but won't sanding and painting cover the finish?

2) I have the sustain pedal and no sustain rod. Sites like vintage vibe sell "sustain guide cup" and "sustain pedal snap bushing." I have the original piece of wood inside the piano box but what connects the actual pedal to the sustain rod? The pedal came with a folded and taped paper clip as a makeshift something.

3) Anyone know where you can find individual sold white plastic key caps? I only need a half dozen and can only find them in sets of 88.

Thanks and I'll post pics as soon as the piano is rebuilt. As for now it's a very thoroughly sanded box sitting beside another box heaping with old hardware

Dunc
Dunc

pianotuner steveo

I don't know where to buy the individual key caps, but I am willing to bet there are several people in the same boat as you.If you bought a whole set,kept what you need, I'll bet you can easily sell the extras to 2 or more other people...
just curious, what does a whole set go for?
1960 Wurlitzer model 700 EP
1968 Gibson G101 Combo organ
1975 Rhodes Piano Bass
1979 Wurlitzer 206A EP
2009 73A Rhodes Mark 7
2009 Korg SV-1 73
2017 Yamaha P255
2020 Kawai CA99
....and a few guitars...

duker

Dunc

Speechless

Quote from: "duker"the set for 88 keys included in a kit is $78.
http://www.vintagevibe.com/p-454-key-cap-restoration-kit.aspx

Those do not work for pianos made before 1974

sean

You will notice that your 1971 has the "full-skirt" keycaps.  This means that they are NOT just a plastic layer over the top of the key and on the front end of the key.  

The full-skirt keycaps cover the sides of the key, so when you push down middle C, you see the plastic sides of the B key on the left.  (The mid-1974 and later pianos would show the bare wood on the side of the white keys.)

The full skirt keycaps fit over a narrowed wooden keyfront.  Turn over the key, and you will see that the front of the key is a plastic key body with a wooden center support.

The other curiosity about these full-skirt keycaps is that the top of the white keys are not flat!  Each white key is slightly rounded on top.  It takes a while to learn to love them, but eventually, you will get used to them.  

You will also find that your black keys have sharper front corners than later (post 1974) black keys.  The later keys are possibly more comfortable to play, because they have a more rounded nose.

     ----------

Make your own sustain push rod according to my 2004 directions:
http://ep-forum.com/smf/index.php?topic=3834

The push rod just pokes up into the hole in the bottom of the piano and rests in the dimple in the dowel.  Nothing special holds the push rod in place (it is not threaded into the piano), you simply extend the length of the pushrod to jam it between the pedal lever and the bottom of the damper push rod (the dowel that you see in the hole in the bottom of the piano).


Sean