Author Topic: Does anyone Have specs for satellite master &slave spea  (Read 1050 times)

Offline paulmulligan

  • Sparkletop
  • ***
  • Posts: 80
    • View Profile
Does anyone Have specs for satellite master &slave spea
« on: June 29, 2010, 09:37:46 PM »
Dear tech experts, does anyone have the specs for constructing satellite speakers and /or making the  power box  that connects to powered speakers to enable use of the preamp and stereo pulsing? My email address in Australia is paulmulligan2009@yahoo.com.au

Offline Rob A

  • Global Moderator
  • Mark V
  • *****
  • Posts: 1386
  • Modal Globerator
    • View Profile
    • Rhodes buyer's guide
Does anyone Have specs for satellite master &slave spea
« Reply #1 on: June 29, 2010, 10:23:32 PM »
Check this out:
http://www.fenderrhodes.org/ch11/fig11-13.jpg

All you need is to provide the +25VDC that the preamp needs on pin 1, referenced to ground on pin 4, and then the two signals are the other two pins (also referenced to ground). If you have any electronics chops at all, this is a pretty easy build. Hardest part is sourcing the 4-pin DIN socket.

Offline Mark II

  • Mark V
  • *****
  • Posts: 1202
    • View Profile
Does anyone Have specs for satellite master &slave spea
« Reply #2 on: June 30, 2010, 03:58:17 AM »
Dear Paul.
there are 3 possilbilties:
    buy one
    build one from scratch
    build one with parts

for solution 1 I made suggestion in one of the other threads
for solution 2: if you have technical skills: this is what you need. If you dont have technical skills forget it and buy one.
for solution 3: you could search for a 25 Volts regulated PSU with at least 250 Milliampere. some laptop PSUs might fit, I found a PSU from a handdriller with these specs. Be creative and google a bit. If you found one we will provede the information to finish your PSU.

kind regards
Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp

Offline Tim Hodges

  • Vendor
  • Mark II
  • *****
  • Posts: 803
  • Tim
    • View Profile
    • Facebook
Does anyone Have specs for satellite master &slave spea
« Reply #3 on: June 30, 2010, 07:32:47 AM »
Mark II you forgot one other option, Paul completely forgot about it go through a normal amp and sell me the pre-amp ;-)

Just kidding!
Bristol Electric Piano
UK

Facebook
YouTube
Reverb.com

Offline jim

  • Mark I
  • ****
  • Posts: 743
    • View Profile
    • http://www.myspace.com/cyberjimpatterson
Does anyone Have specs for satellite master &slave spea
« Reply #4 on: June 30, 2010, 09:18:24 PM »
Mark 11,
SNAP!
I've also used a drill power supply on a rhodes! :)

Offline Mark II

  • Mark V
  • *****
  • Posts: 1202
    • View Profile
Does anyone Have specs for satellite master &slave spea
« Reply #5 on: July 01, 2010, 12:39:57 PM »
hehehe Jim. :D
Well, actually it is still lying in my project box as the one I have built from scratch is working well.

regards
Mark II
Rhodes Stage 73 Mark II 1980 / modified Peterson Suitcase Preamp