Wurlitzer 200A No Power

[mydeadblues]

This past weekend I finally got around to working on the action on my 200A. I fired it up after I put it back together and the LED light blinked a few times then shut off completely. The piano was working fine prior to taking it apart. Where would be a good starting point for troubleshooting this problem? Any suggestions would be greatly appreciated! Thanks guys!

[cinnanon]

Make sure you have power at the wall socket first. Make sure you have power getting to the volume pot/switch inside the piano. Make sure the switch works. Keep going down the line. Check the fuses with a multimeter. There are 2 on the amp board and 1 next to the light bulb. Check that one first. Are you decent with electronics? Do this all with the power off and using a multimeter.

[mydeadblues]

Thank you! I will check the fuses and follow the volume pot later today. I'm hoping it's a loose connection somewhere, which might make sense given the LED flashed then turned off.  I'm pretty comfortable doing minor electric repairs.