News:

Follow us on Twitter for important announcements and outage notices.

Main Menu

Name plate wiring - likely culprit?

Started by defspace, September 16, 2016, 08:33:18 AM

Previous topic - Next topic

defspace

Hi,
I've been dealing with some volume issues with my 1971 77-key stage piano.

I get good volume if I plug directly into the phono jack, so I've isolated the problem to the name plate volume/tone circuit. I figured this all out last night, but I didn't have enough time to suss everything out.

I'm pretty handy with a soldering iron. I've wired up lots of guitars, so I have no problem just wiring up a new harness, but I'd rather keep the old parts in there.

What's the SOP for reviving the old wiring harness? Who are my likely culprits? For what it's worth, this low volume problem started after a period of a few months in which I was not able to play my piano.

Thanks

4kinga

Check the RCA cable for corrosion.
Check the pots with a dvm.  At 10 there should be no resistance.
By-pass the tone control (jumper/desolder) and see if the output changes.

And remember, have fun!  :)