Author Topic: Can someone post dimensions of a Wurlitzer 112 leg?  (Read 1423 times)

Offline leanbow

  • Fiesta Red
  • **
  • Posts: 11
    • View Profile
Can someone post dimensions of a Wurlitzer 112 leg?
« on: October 07, 2016, 11:36:17 PM »
I am thinking of having someone just fabricate a few for me locally. Thinking: Length from shoulder/top to end, diameter at top and diameter at bottom would be great. I imagine the thread for the bolt on top is the same as the more common chrome legs for the 200's as they are advertised as universal. My research has come up with none available but I would be glad to hear if there is a better way...

Offline pennywhistle

  • Fiesta Red
  • **
  • Posts: 13
    • View Profile
Re: Can someone post dimensions of a Wurlitzer 112 leg?
« Reply #1 on: October 08, 2016, 11:01:27 AM »
I don't check this board too often but funny to see a 112 question at the top of the heap when I have questions too...

Here are the leg dimensions

Length: 25 & 1/8". There is a glide at the bottom which makes up that extra 1/8".
Top width: 1 & 3/4"
Bottom width: 11/16"
The threaded stock at the top is about 3/8" tall.

Offline pianotuner steveo

  • MIDI Mark V
  • *****
  • Posts: 3288
  • A keyboard player in love with vintage guitars!!!
    • View Profile
Re: Can someone post dimensions of a Wurlitzer 112 leg?
« Reply #2 on: October 08, 2016, 04:05:08 PM »
I'm 90% sure that all Wurlitzer legs (this style) are the same size...if so, you can buy replacements.
1960 Wurlitzer model 700 EP
1968 Gibson G101 Combo organ
1975 Rhodes Piano Bass
1979 Wurlitzer 206A EP
1980 Wurlitzer 200A EP
1980 Wurlitzer 270 Butterfly Grand
2000 Yamaha acoustic piano
2004 Hammond XK3
2009 73A Rhodes Mark 7
2009 Korg SV-1 73
....and a few guitars...

Offline leanbow

  • Fiesta Red
  • **
  • Posts: 11
    • View Profile
Re: Can someone post dimensions of a Wurlitzer 112 leg?
« Reply #3 on: October 25, 2016, 11:17:36 AM »
Thank you both for the help.
I found a leg on amazon for $8 that when shortened came very close to original measurements you gave me.

The Hanger bolts (top of the legs that go in to the brackets on the case) are 3/8"-16

Steveo - it helped to know that they are all the same as I had some 200 series legs and they were very close and good for testing and comparing.

I will add some shots of the parts in case someone else wants to travel this path. I am trying to save money on this project as my starting point 112 has been picked over for parts and is definitely not a good financial decision.
« Last Edit: October 25, 2016, 09:01:37 PM by leanbow »